wall industries, inc. 5 watson brook road exeter, nh 03833 12/05/2012 603-778-2300 www.wallindustries.com fax 603-778-9797 page 1 of 4 datasheet rev. a PSHF150W-SMF series 88~132 / 170~264vac input selectable by switch up to 156 watts output power 5, 7.5, 9, 12, 24, 27, & 36vdc single outputs ac/dc switching power supplies features ? rohs compliant ? 10% voltage adjustment range ? free air convection ? 85~132/170~264vac input selectable by switch ? short circuit, over load, and over voltage protection ? high power density ? single outputs ? electrolytic capacitors all 105c ? 7.83? x 3.86? x 1.54? enclosed case ? up to 156w output power ? 100% full load burn-in test ? ul60950, en60950, gb4943, and ce approvals description the PSHF150W-SMF series of ac/dc power supplies o ffers up to 156w of output power in a 7.83? x 3.86? x 1.54? enclosed case. this series consists of 5, 12, 13.5, 15, 24, and 48vdc single output models with an input voltage range of 85~132/170~264vac se lectable by switch. these supplies have a 10% output adjustment range and are protected against short circuit, over lo ad, and over voltage conditions. this series is rohs compliant and has ul60950, en60950, gb4943, and ce approvals.
rev. a PSHF150W-SMF series single outputs up to 156 watts ac/dc switching power supplies wall industries, inc. 5 watson brook road exeter, nh 03833 12/05/2012 603-778-2300 www.wallindustries.com fax 603-778-9797 page 2 of 4 specifications: PSHF150W-SMF series all specifications are based on 25c, nominal input voltage, and maximum output current unless otherwise noted. we reserve the right to change specific ations based on technological advances. specification test conditions min nom max unit input specifications input voltage range selected by switch 85~132 / 170~264vac vin = 115vac 3.5 input current vin = 230vac 1.8 a vin = 115vac 20 inrush current vin = 230vac cold start 40 a input leakage current vin = 230vac 1 ma input frequency 47 63 hz output specifications output voltage see table voltage adjustment range -10 +10 % 5vdc output model -2 +2 voltage tolerance others -1 +1 % line regulation low line to high line at full load -0.5 +0.5 % load regulation 0% to 100% of rated load 0.5 % output current see table output power see table ripple & noise see note 1 see table rise time full load 50 ms hold-up time full load 20 ms protection over load protection shut off, re-power on to recover 110 130 % over voltage protection shut off, re-power on to recover 115 150 % short circuit protection shut off, re-power on to recover general specifications efficiency see table input to output 3000 input to pe 1500 withstand voltage output to pe all for 1 minute 500 vac environmental specifications operating temperature see derating curve -20 +70 c operating humidity non-condensing 20 93 % rh storage temperature -20 +85 c storage humidity non-condensing 20 95 % rh vibration 10~150hz, 2g 10 min/1 cycle, 30 min each along x, y, z axes cooling free air convection mtbf > 100,000 hours physical specifications weight 1.5 lbs (660g) dimensions (l x w x h) 7.83 x 3.86 x 1.54 inches (199 x 98 x 39 mm) safety & emc characteristics safety standards ul60950, en60950, gb4943 emc standards gb9254, en55022 class b, en55024, en61000-3-2,3, en61000-4-2,3,4,5,6,8,11
rev. a PSHF150W-SMF series single outputs up to 156 watts ac/dc switching power supplies wall industries, inc. 5 watson brook road exeter, nh 03833 12/05/2012 603-778-2300 www.wallindustries.com fax 603-778-9797 page 3 of 4 model selection table model number input voltage range output voltage output current ripple & noise (1) output power efficiency PSHF150W-SMF-5 5 vdc 25.0 a 100mvp-p 125w 80% PSHF150W-SMF-12 12 vdc 12.5 a 120mvp-p 150w 84% PSHF150W-SMF-13.5 13.5 vdc 11.1 a 120mvp-p 150w 84% PSHF150W-SMF-15 15 vdc 10.0 a 120mvp-p 150w 84% PSHF150W-SMF-24 24 vdc 6.5 a 150mvp-p 156w 85% PSHF150W-SMF-48 85~132 / 170~264 vac (selectable by switch) 48 vdc 3.1 a 150mvp-p 149w 87% notes 1. ripple & noise is measured at 20mhz us ing a 12" twisted pair-wire terminated with 0.1f and 47f capacitors in parallel. 2. the power supply is considered a compone nt which will be installed into final equipm ent. the final equipment must be re-conf irmed that it still meets emc directives. mechanical drawing unit: inches (mm) 0.40 (10.2) 0.71 (18) 0.14 (3.5) 0.87 (22) 3-m3 0.26 (6.5) 1.54 (39) 1.13 (28.7) 0.78 (19.7) 6.18 (157) ?0.14 (?3.5) 7.48 (190) 0.37 (9.5) 0.31 (8) 3.86 (98) 3.37 (85.5) ?0.14 (?3.5) led vadj 6-m3 0.28 (7) 0.18 (4.5) 1 2 3 4 5 6 7 3.15 (80) 0.35 (9) 2.44 (62) 4.72 (120) 0.24 (6) 0.14 (3.5) 7.58 (192.5) 7.83 (199) pin assignment 1 ac/l 2 ac/n 3 pe 4,5 dc output (-v) 6,7 dc output (+v) length of assembly screw: 6mm max.
rev. a PSHF150W-SMF series single outputs up to 156 watts ac/dc switching power supplies wall industries, inc. 5 watson brook road exeter, nh 03833 12/05/2012 603-778-2300 www.wallindustries.com fax 603-778-9797 page 4 of 4 derating curve 100 90 70 50 30 0 -20 -10 0 10 20 30 40 45 50 60 70 output power (%) ambient temperature (c) company information wall industries, inc. has created custom and modified units for over 50 years. our in-house research and development engineers will provide a solution that exceeds your perfo rmance requirements on-time and on budget. our iso9001-2008 certification is just one example of our commitment to produc ing a high quality, well-documented product for our customers. our past projects demonstrate our commitment to you, our cu stomer. wall industries, inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and f unction requirements. we will continue to provide ongoing support for your project a bove and beyond the design and production phases. give us a call today to discuss your future projects. contact wall industries for further information: phone : ? (603)778-2300 toll free : ? (888)587-9255 fax : ? (603)778-9797 e-mail : sales@wallindustries.com web : www.wallindustries.com address : 5 watson brook rd. exeter, nh 03833
|
